Vigor Proguard Rubber Wood Top Mat (100 x 100 x 2cm)

The Vigor Proguard Rubber Tile Mat features a 0.6mm wood grain PVC top, 1.5mm thick high-density wearable surface layer in the middle, and is made of black SBR under;

Wooden vinyl top mat features a top vinyl layer which is harder than rubber. The touch is similar to vinyl flooring.

Feature:

• 20mm thick
• Air pockets under them to increase the absorption of impact
• Easy to join together with plastic connector clips
• 6 connector clips provided for every piece of mat.
• Easy self installation. Connect the clips at either the middle or corner of each piece to join them together.
• Premium grade rubber - No foul odour (only very light smell)

Pros:

• Thicker at similar price point compared to our other rubber mats
• Greater absorption

Cons:

• The plastic connector clips underneath are in direct contact with the floor, which makes it not suitable for flooring that is easily scratched (eg. wood, marble, etc).

Specifications Tolerance:

• length ± 0.5 cm
• width ± 0.5 cm
• thickness ± 0.2 cm

Tech specs:

• Surface layer density: 1200kg /m3
• Shore hardness: A/59/1
• Tensile strength: 1.65 MPa
• Elongation at break: 150%
• Bearing capacity: 50ONN gravity, pressure: 28.9kpa, indenter diameter 11.3mm, indentation:0.31mm
• Fire rating: building material combustion performance rating B2 (GB8624-2012)
• Chemical test: SGS heavy metal test, SGS indoor methanal test, SGS sound insulation test
• Raw material test: LABOSPORT France standard 5000 hours anti-aging test report

Additional Product Specs: